Buy it Now
1 pcs sample
This is the 1000W transmitter cover range 20-30KM if it use with the 4-Bay DV1 antenna outside.It set for the people who want to build the professional fm station . It is widely used on the meeting ,village broadcasting,Speech ,concert .And also schools,supermarkets, factories, railway stations, conferences. You can build your own station easily.
If you are the dealer who want to resale this transmitters in your country.Please contact Erin .We can give you more suggestion.
Minimalist design philosophy, the incentive 1KW FM stereo transmitter and power amplifier, the output filter, switching power supply installed in a standard 19-inch 3U high chassis, reducing the connection cables between the various components of ordinary transmitter higher reliability, easier to operate.
- Minimalist design, integrated structure, high reliability, easy operation.
- The whole process of digital processing (DSP + DDS), achieve near perfect CD quality sound effects.
- Analog audio and digital audio (AES / EBU) can be entered at the same time, digital audio priority.
- Provide the most complete remote telemetry interface and the interface protocol.
- Perfect over-current, over voltage, over temperature, over power, VSWR excessive alarm and protection.
- Large-screen LCD display real-time operating parameters.
- High-quality stainless steel, 3U, 19-inch standard cabinet.
- Frequency Range:87.0MHz~108 MHz
- Frequency Setting step:10KHz
- Carrier Frequency precision:±200Hz
- Residual Wave Radiation:≥65dBc
- Audio Input Impedance:600Ω,Balance
- Audio Input Level:±10dBm,step 0.01dB
- Audio Harmonic Distortion: <0.05%
- Audio response:±0.05dB(10Hz~15KHz)
- Output Load Impedance:50Ω
- Output Power:500W,1000W
- Pilot Frequency:19 kHz±1Hz
- Pilot Signal Modulation:8%~10%
- Sub-carrier Suppression:≥65dB
- RF Output connector:7/16′(female)/7/8’Flange
About the Antenna:
Used for FM radio broadcasting system, to receive FM radio transmitter output power signal and send the signal out efficiently. Can use multiple antenna multi-antenna array to enhance the gain of the transmitting antenna.
* side-mount low-loss
* Broadband Antennas
* vertical polarization
* stainless steel
* DC Grounding
The main parameters:
1. Product Type: FM-DV1
2. Characteristic Impedance: 50Ω
3. Frequency range: 87 ~ 108 MHz
4. Antenna Gain: 1.5dB
5. Polarization: Vertical Polarization
6. VSWR: <1.10 (specify frequency), “1.30 (full bandwidth)
7. Rated power: 1KW / 3KW/5KW/10KW
8. Group matrix combination of: the antenna array unit is particularly suitable for the formation of a variety of radiation patterns
9. Input Interface: L27-50K (1KW) / IF45-50K (3KW) / IF70-50K (5KW) / IF110-50K (10KW)
1. to withstand wind load: 32kg
2. Maximum speed: 160km / h
3. Antenna Weight: 11kg
4. mast diameter: φ50-100mm
5. Dimensions: 1360x1060x60mm
6.Gross Weight: 15kG
7. Volume weight: 39KG
1. radiator: 304
2. Inner conductor: silver plated copper
3. insulation support: PTFE
4. Clamp: hot dip galvanized steel
Buy it Now
1 pcs sample