A studio-transmitter link (or STL) sends a radio station’s or television station’s audio and video from the broadcast studio to a radio transmitter or television transmitter in another location


Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
2800 USD
/pcs
310 USD
DHL/UPS 7-10days

pcs
2800 USD
/pcs
310 USD
DHL/UPS 7-10days


stl-650

This is often necessary because the best locations for an antenna are on top of a mountain, where a much shorter tower is required, but where a studio is completely impractical. Even in flat regions, the center of the station’s allowed coverage area may not be near the studio location or within a populated area where a transmitter would be frowned upon by the community, so the antenna must be placed several miles or kilometres away.

Depending on the locations that must be connected, a station may choose either a point to point (PTP) link on another special radio frequency, or a newer all-digital wired link via a dedicated T1 or E1 (or larger-capacity) line. Radio links can also be digital, or the older analog type, or a hybrid of the two. Even on older all-analog systems, multiple audio and data channels can be sent using subcarriers.

Introduction:

STL10 Studio to Transmitter Link / Inter-city Relay is a VHF / UHF FM communications system providing a high quality broadcast audio channel with variety optional bands.These systems offer greater rejection of interference, superior noise performance, much lower channel cross-talk, and greater redundancy than currently available composite STL systems.

Features:

*Synthesized from 220 to 260MHz, 300 to 320MHz, 320 to 340MHz,400 to 420MHz and 450 to 490MHz
*The transmitted and received frequency can be easily set by digital front panel
*Suitable for digital audio. The subsonic over modulation and the low frequency phase distortion are controlled by a feedback circuit in order to exalt the audio quality of the latest digital systems.
*Low THD distortion: the THD value with stereo or mono demodulated and deemphasized signals is negligible.
*Flat frequency response: due to the latest generation technology and the components precision the flatness of frequency response is absolute.
*Low noise: the excellent signal to noise ratio either in mono or in stereo allows the use of this STL¡ˉs in multi-hops networks without decreasing the audio quality.
*High sensitivity: it allows to reduce the STL’s antennas investment.
*Great RF immunity: allows to operate in most hostile RF environments.
*High adjacent channel rejection: obtained thanks to the excellent mechanical shielding and the precision of RF filtering.
*High frequency stability with the internal temperature compensated crystal reference.
* Integrated LCD Display: complete diagnostic and measurement front panel LCD displays.
*Integrated information display and protection controls: for all transmit parameter and protection for malfunction.

Technical Specification – transmitter:

*Frequency range: 220 to 239.99 MHz , 240 to 259.99 MHz , 300 to 319.99 MHz, 400 to 419.99 MHz , 450 to 469.99 MHz , 470 to 489.99 MHz.
* Modulation: FM, +-/5 KHz peak deviation
*Frequency stability: <+/-100 Hz
* RF output power: 0 to 15 W +/-0.5 dB
* Max reflected power: 5 W
* Harmonic suppression: <-65 dBC
* RF output impedance: 50 ohm
* RF output connector: N Type -female
* Audio/MPX input level: -10 to +13 dBm @+/-75 KHz deviation
* Audio/MPX input impedance: 10 K Ohm
*MPX and AUX input connector: BNC-female
*Pre-emphasis: 0 / 25/ 50 / 75 us
*S/N ratio Mono: >73 dB (20 to 20 KHz)
*S/N ratio Stereo: >68 dB (20 to 15 KHz)
*Distortion: <0.05% THD @+/-75 KHz dev. <0.2% THD @+/- 150 KHz dev. (limiter threshold > 150 KHz)
*Stereo crosstalk: >60 dB (100 to 5 KHz)  >50 dB (20 to 15 KHz) int. MPX encoder >60 dB with ext. MPX encoder
*Audio channel frequency response: 20 to 15 KHz +/- 0.15 dB
*MPX input frequency response: 10 to 100 KHz +/- 0.15 dB
*AUX input frequency response: 10 to 100 KHz +/- 0.15 dB
*Mains power supply requirements: 90~264VAC; 127~370VDC, Full range   universal input
*Operating temperature range: -10 to 45 celcius degrees
*Dimensions : 483 x 132.5 x 400 mm, rack std. 19”± 2U
*Weight: 6.5 Kg

Technical Specification- receiver:

* Frequency range: 220 to 239.99 MHz , 240 to 259.99 MHz , 300 to 319.99MHz, 400 to 419.99 MHz , 450 to 469.99 MHz , 470 to 489.99 MHz.
* Sensitivity: -98 dBm at 16 dB SINDA
* Frequency response: 20 Hz to 53 KHz +/-0.1 dB
* Stereo separation: 20 Hz to 15 KHz >58 dB
* S/N Ratio : >65 dB @-40 dBm , 75 KHz dev. and 1 KHz mod.
* THD : 20 Hz to 53 KHz \<0.3%
* Selectivity: +/-160 KHz at -3 dB IF BW +/-500 KHz at -62 dB IF BW
* Image rejection: >65 dB
* Stereo audio output impedance: 600Ohm balanced
* Stereo audio output connector: XLR-M
* MPX output impedance: 10K Ohm
* MPX output connector: BNC-F
* Monitor output: >2×0.2 W stereo at 120 Ohm
* Monitor output connector: 6.3mm stereo phone jack
* RF input impedance: 50Ohm
* RF input connector: N Type -female
* AC power: 85~264VAC; 120~370VDC, Full range universal input
* Power consumption: approx 25W from AC
* Operating temperature range: -10 to 45 celcius degrees
* Dimensions : 483 x 89 x 320 mm , rack std. 19” 2U
* Weight: 5 Kg

Package Include:

1x STL Transmitter
1x STL Receiver

stl-3

stl-9 stl-4  stl-5 stl-8 stl-7


Sample/Wholesale
Price
Shipping
Carrier
Buy it Now
1 pcs sample
2800 USD
/pcs
310 USD
DHL/UPS 7-10days

pcs
2800 USD
/pcs
310 USD
DHL/UPS 7-10days


Random

CZH518D-500w All solid-state Digital TV Territorial Broadcast Transmitter UHF 13-48 channel bandwidth:6-8MHZ
CZH518D-500w All solid-state Digital TV Territorial Broadcast Transmitter UHF 13-48 channel bandwidth:6-8MHZ

FMUSER FU-1000W FM broadcast radio Transmitter Audio Station with ZHC-DV1 fm Antenna and RF cable A SET Free Shipping
FMUSER FU-1000W FM broadcast radio Transmitter Audio Station with ZHC-DV1 fm Antenna and RF cable A SET Free Shipping

1000W(1KW)-3500VA  High performance Rack digital  FM exciter Stereo Transmitter 87MHz-108MHz
1000W(1KW)-3500VA High performance Rack digital FM exciter Stereo Transmitter 87MHz-108MHz

1000W FM Radio Station Audio Broadcasting FM Studio
1000W FM Radio Station Audio Broadcasting FM Studio

FUTV4656C DVB-T/DVB-C(QAM)/ATSC MPEG-2 SD Encoder Modulator (Tuner,CVBS in; RF out) with USB Record/Save/Playback for Home Use
FUTV4656C DVB-T/DVB-C(QAM)/ATSC MPEG-2 SD Encoder Modulator (Tuner,CVBS in; RF out) with USB Record/Save/Playback for Home Use

FMUSER FM-DV1 1 bay FM dipole antenna  professional antenna for FM transmitter tv transmitter radio station
FMUSER FM-DV1 1 bay FM dipole antenna professional antenna for FM transmitter tv transmitter radio station

Fmuser CP100 fm broadcast Circular Elliptical Polarized Antenna Maximum power 500W transmitter Free Shipping
Fmuser CP100 fm broadcast Circular Elliptical Polarized Antenna Maximum power 500W transmitter Free Shipping

CZH-T200 0.2w Portable FM Transmitter radio broadcast Stereo/Mono Power adjustable For Tourism Driving School Meeting
CZH-T200 0.2w Portable FM Transmitter radio broadcast Stereo/Mono Power adjustable For Tourism Driving School Meeting

This entry was posted in Products, Studio transmitter Link and tagged , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *